02/04/2019

EFESTO project, coordinated by Elecnor Deimos, successfully kicked-off

EFESTO project (European Flexible hEat Shields: advanced TPS design and tests for future in-Orbit demonstration) funded by Horizon 2020 Space Programme, has been kicked-off on 27th of March 2019.

Elecnor Deimos coordinates the EFESTO team, formed by CIRA, DLR, ONERA, AVIOSPACE and POLITO. The project end goal is to improve the Technology Readiness Levels (TRL) of Inflatable Heat Shields for re-entry vehicles from 3 to 4/5, and pave the way towards further improvements (TRL 6 with a future In-Orbit Demonstrator).

EFESTO aims at (1) the definition of critical space mission scenarios (Earth and Mars applications) enabled by the use of advanced inflatable Thermal Protection Systems (TPS), (2) characterization of the operative environment and (3) validation by tests of both the flexible materials needed for the thermal protection (flexible thermal blanket will be tested in arcjet facility in both Earth and Martian environments) and the inflatable structure at 1:1 scale (exploring the morphing dynamics and materials response from packed to fully inflated configuration). These results will be injected into the consolidated design of a future In-Orbit Demonstrator mission.

EFESTO will provide advances in the three areas of thermal control, materials and structures through the design and testing of innovative inflatable thermal protection systems (TPS) solutions for re-entry vehicles.

Fully in line with the H2020 call SPACE-11-TEC-2018, EFESTO will provide advances in the three areas of thermal control, materials and structures through the design and testing of innovative inflatable TPS solutions for re-entry vehicles. It will enable new space mission concepts, which require bringing a payload from space to ground of a planetary body with an atmosphere beyond the current limits imposed by launcher fairing size or rigid heat shields geometrical and structural aspects. Morphing solutions will allow for example landing bigger or heavier payload on Mars or will enable the reusability of launchers upper stages enhancing European reusability and cost reductions in the access to space industry. Non space applications in the areas of materials and structures will also be considered.

Leveraging on the consortium background and on past, current and planned tests results in the field, competitiveness in the space sector will be fostered and key contributions to the long-term European re-entry technology roadmap will be provided.

This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 821801.

News

Load More News